"IEEE 802.3af compliance

Converts non-PoE devices with Power over Ethernet support

Adjustable output DIP switch for 5V, 9V, and 12V adjustable output

Delivering power and data to equipment via a single Ethernet cable

Eliminates the need for a bulky power adapter and power line for your appliance

Compatible with Wireless Router, AP, Network Camera, Print server, Converter

Light weight and compact size

Provides interchangeable tips


The LevelOne POS-1002 PoE Splitter splits a networked PoE signal into separate power and Fast Ethernet data sources. This device allows administrators to run Fast Ethernet speed PoE cables over long distances and then split the PoE signal into separate data and power sources in order to network non-PoE devices. This active PoE splitter is available in the following output voltages (5V or 9V OR 12V). Save installation and equipment cost when installing access points, IP cameras and more in remote locations With no need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Fast Ethernet speeds.


"

 "IEEE 802.3af compliance

Minimize the need for a bulky power adapter and power line

Delivering power and data to equipment via a single Ethernet cable

Internal power supply

High safety with surge protection

Remote power feeding up to 100 meters

PnP, Light Weight and compact size

Unique interlocking feature for easy installation

The POI-2002 is a Power over Ethernet Injector with one Ethernet Input (data only) port and one Output (data + power) port that is designed for small or medium network environments. This product can convert standard 100~240V/AC power into lowvoltage DC that runs over existing LAN cable to power up IEEE 802.3af compliant network accessories. It also features PoE awareness to verify whether the network device receiving power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding a PoE Splitter (POS-1002) to existing non-PoE networking equipment, installing networking products such as Access Points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don’t need to use AC power adapters anymore.


"

 "Compact splitter supports Gigabit speeds

Automatically detects PoE terminals and supplies inline power

Easily install non-PoE devices where a power outlet is not available

Reduce installation and network equipment costs

Safeguards network device with short circuit protection

Adjustable DIP switch for 5V, 9V, or 12V output

Intergrates Non-PoE devices with Power Over Ethernet support

Auto-sensing power drawn from 802.3af / 802.3at power source equipment(PSE) devices

Supplies power up to 25 watts

Provides Interchangeable tips

Advanced PoE Solution
The LevelOne POS-3000 Gigabit High Power PoE Splitter splits a networked PoE Signal into separated power and Gigabit data sources. This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE signal into separated data and power sources in order to network non-PoE devices. Active splitters are aslo available in the following output voltages (5V or 9V or 12V). Save installation and equipment cost when installing 802.11n access points, (Pan/Tilt/Zoom) IP cameras and more in remote locations. No need to install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.


"

 "High Power PoE Splitter (12V)
12 DC 2.5A High Power PoE Splitter
Split Power Over Ethernet ( PoE) to remote devices
DC Output:12V DC (default),9,6,5,3.3V DC ( Optional)
Ethernet 100Mbps Wire Speed
Simple to install – Plug & Playsolution to protect original investment.

The traditional PoE standard (IEEE 802.3af) supports 15.4 watts, which is fine for regular devices. But what do you do if your network camera, or wireless access point needs more power? POS-4000 is a PoE Splitter that adds PoE functionality to any network device that requires high power.

When used in a Power over Ethernet network, POS-4000 takes the power sent over the Cat.5 cable from the PSE (Power Sourcing Equipment) and delivers it to the non-PoE network device for easy and flexible installation. Internal current limit, short-circuit and overload protection are implemented to provide up to DC 12V/2.5A.

POS-4000 can also work together with LevelOne’s high-power PoE injector, POI-4000. This can extend Ethernet connectivity an additional 100 meters for high power PD devices, such as IP network cameras, wireless access points, VoIP phones or other devices that require power greater than 15.4 W.
"

 "Up to 30W of PoE Power Feeding on 2-pairs

IEEE 802.3at Compliant

IEEE 802.3af backward compatible

Compatible with IEEE 802.3af or Legacy PoE applications

Safe on Low Power Devices Receive Only the Power They Need

Safe and Reliable Power to WLAN Access Points

Automatic Detection and Protection of Non–standard Ethernet Terminals

Supports 10/100/1000Base-T LAN environnent

Unique interlocking feature for easy installation

Advanced PoE Solution
The LevelOne POI-3000 is a single port, high power PoE PSE solution for remote PoE PD devices. Generating up to 30W , POI-3000 supplies remote power for new applications such as wireless access points, pan-tilt-zoom (PTZ) IP cameras and videophones. It complies with IEEE 802.3at PoE standard and is backward to IEEE802.3af. It can work with 10/100Base-T networking devices and emerging 1000Base-T devices such as Wi-MAX and wireless IEEE 802.11n access points. For all the function featured in POI-3000, people can get the benefit of flexible network installation at lower cost, less downtime. It also provides a high-bandwidth pipe to the network.


"

 "Extends Gigabit PoE connection for another 100 meters
Forwards Power over Ethernet (PoE) to remote device
Built-in two output ports for a PoE and a non-PoE devices
No additional power supply required
10/100/1000Mbps wire speed transmission and reception
Simple Plug and Play installation




For system integrators looking for a professional solution to help extend their PoE network, POR-0120 is the perfect accessory to increase your Power over Ethernet network performance. LevelOne POR-0120, a 1-Port Gigabit PoE Repeater requiring neither configuration nor electrical power, is an innovative transmitter to pass on both data and power extend to another 100 meters. The delivery though one PoE port and one non-PoE port are adequate to extend network devices such as WLAN Access Points, Network Cameras and other appliances with high-speed to the network for greater deployment flexibility

PoE Compliance
Our device features PoE (Power-over-Ethernet) capability, which carries electrical power along with data in a safe way using Ethernet cabling. Thus providing great cost savings by eliminating the need for additional power cables and outlets. In addition, it enhances flexibility, for instance, you can set up a PoE wireless access point in close proximity where the reception is better.

Easy Deployment
No software installation is required. Simply just plug and play as no external power supply is needed, due to all electrical power comes from the PSE (Power Sending Equipment), for instance, it could be a PoE Gigabit Ethernet Switch. Therefore the power source is centrally managed from one location easily and
efficiently.

Scalable Design
LevelOne network devices are the perfect solution to help you extend your existing PoE network. Normal
Ethernet cable, for example the cat5e standard, runs up to 100 meters, but with the installation of a single PoE repeater can increase the distance up to 200 meters. Furthermore, you can triple your range or even more by daisy-chaining multiple PoE repeaters."

 "Complies with IEEE802.3af Power Over Ethernet standard

Power distribution through existing Ethernet cable

Remote power feeding up to 100m

8 ports to any vendor's switches

8 ports to POE devices or POE splitters

Provides utility for power management

Eliminates the need of external power adapter for Ethernet device

Compact 19" rack mountable in 1U

LevelOne’s 19” Mid-Span POE hub is equipped with 8 RJ-45 ports featuring POE function to eliminate the bulky power cable need while implementing your network infrastructure thus allowing greater flexibility in the locating of network devices and significantly decreasing installation costs.
The product is fully complaint with the IEEE 802.1af standard and acts as a patch panel between a switch and other network devices to provide power and data on the existing standard Cat 5 Ethernet cable. There is no need to replace your original Ethernet equipment to realize the advantage or POE. The remote power feeding can up to 100 meters. Your network devices can be installed in more appropriate position for better performance. The embedded software utility provides GUI interface allowing you easily to configure and manage this device including auto detecting PD and power consumption, resetting the appliance remotely and providing the power central management (e.g. UPS backup system).
The compact 19", 1U rack-mountable design enables the switch to be easily located in a server room or computer lab in order to centralize power management and simplify network integration for various applications. For all the functions featured in POH-0850TX, people can get the benefits of flexible network solutions that can simplify the installation of wireless AP, network camera systems and other devices or applications in the network."

 "Extends Gigabit PoE connection for another 100 meters
Forwards Power over Ethernet (PoE) to remote device
Built-in 2 PoE output ports for PoE devices
No additional power supply required
10/100/1000Mbps wire speed transmission and reception
Simple Plug and Play installation

For system integrators looking for a professional solution to help extend their PoE network, POR-0122 is the perfect accessory to increase your Power over Ethernet network performance. LevelOne POR-0122, a 2-Port Gigabit PoE Repeater requiring neither configuration nor electrical power, is an innovative transmitter to pass on both data and power extend to another 100 meters. It delivers both data and power to two PoE network devices such as WLAN Access Points, Network Cameras and other appliances with fast speed to the network for greater deployment flexibility.

PoE Compliance
Our device features PoE (Power-over-Ethernet) capability, which carries electrical power along with data in a safe way using Ethernet cabling. Thus providing great cost savings by eliminating the need for additional power cables and outlets. In addition, it enhances flexibility, for instance, you can set up a PoE wireless access point in close proximity where the reception is better.

Easy Deployment
No software installation is required. Simply just plug and play as no external power supply is needed, due to all electrical power comes from the PoE PSE (Power Sourcing Equipment), for instance, it could be a PoE Gigabit Ethernet Switch. Therefore the power source is centrally managed from one location easily and
efficiently.

Scalable Design
LevelOne network devices are the perfect solution to help you extend your existing PoE network. Normal
Ethernet cable, for example the cat5e standard, runs up to 100 meters, but with the installation of a single PoE repeater can increase the distance up to 200 meters. Furthermore, you can triple your range or even more by daisy-chaining multiple PoE repeaters."